DIN Series
DIN Series Panel Meters Provide Maximum Flexibility
RT Engineering's DIN Series panel meters provide maximum flexibility in the field of digital indication. The DIN series combines a Universal input scheme with a product so Versatile, it can be used in a wide variety of applications - one model that's capable of doing many things well.
Voltage Input Models accept AC or DC inputs from 50 MV to 500 V from a multitude of signal sources. The DIN Series meters can monitor and display electrical units, such as AC or DC amps and volts, or other engineering units, such as FPM, RPM, GPM and others.
Accuracy, Reliability, and Versatility backed by a two-year warranty
Specifications
Voltage Model Specifications
- Typical Input Signals:
- AC or DC signals from motor armatures, line or reference voltages, tachometers, force transducers (load cells), shunts, current transformers, pressure and flow transducers
- Input Ranges:
- (A) 50mvDC; 100mvAC (B) 500mvDC; 1VAC (C) 5VDC; 10VAC (D) 50VDC; 100VAC.
- Note:
- "D" scale accepts voltages up to 500VDC/480VDC
- Maximum Input and Overrange:
- 1000‰ of range or 500V AC and DC which ever is less
- Input Resistance at Nominal Scale Values:
- 20K Ohms/volt, AC and DC
- AC Frequency Range:
- Max. signal: 500 Hz, Min. signal: 40 Hz
- Accuracy:
- .5‰ linear +/- 1 digit full scale
- Sampling Time:
- .4 seconds/reading update
- Response Time (0 to full scale):
- 5 seconds
- Power Requirement:
- 115VAC (+/- 10V), 50/60 Hz, 2 watts
- Operating Temperature:
- 5°C to 50°C
- Calibration Method:
- Scale selecting jumper and a 20-turn potentiometer for coarse adjustment and a multi-turn potentiometer for fine tuning
- Construction:
- RFI shielded high impact (UL94V-0) plastic case with LOX-IT self locking Lexan bezel over display
- Weight:
- 1 pound
Process Control Model Specifications
- Typical Input Signals:
- Current source, typically 4-20MA, 5-50MA, or offset voltage 1-5VDC, etc.
- "BIAS" Adjustment Range:
- 0-40‰ of full scale
- "SCALE" Adjustment Range:
- 10-100‰ of full scale
- Shunt Resistance:
- Infinite or 250 ohms customer jumper selectable (other values of 50 to 600 ohms inclusive are available on customer request)
- Accuracy:
- .5 linear +/- 1 digit full scale
- Sampling Time:
- .4 seconds/reading update
- Response Time (0 to full scale):
- 5 seconds
- Power Requirement:
- 115VAC (+/- 10V), 50/60 Hz, 2 watts
- Operating Temperature:
- 5°C to 50°C
- Construction:
- RFI shielded high impact (UL94V-0) plastic case with LOX-IT self locking Lexan bezel over display
- Weight:
- 1 pound
Pulse Model Specifications
- Typical Input Signals:
- Standard magnetic pickup (30 inches per sec. minimum gear or sprocket speed at 1/64" maximum gap) Hall effect type pickup which can operate from the 5VDC meter supply or slow speed type pickup such as RT Engineering P/N RT-58426. A 1/32" maximum gap is required between the gear and pickup. Output wave-form from either six step, pulse width modulated (PWM), or current source inverter up to 480VAC when the meter has proper interface. Signal isolation transformer P/N RT-TA-181210 is available if customer required.
- Standard Input Signal Range:
- 5PPS to 22,000PPS
- Accuracy:
- .5‰ linear +/- 1 digit full scale
- Sample Time:
- .4 seconds/reading update
- Response Time (0 to full scale):
- 5 seconds
- Power Requirement:
- 115VAC (+/- 10V), 50/60 Hz, 2 watts
- Operating Temperature:
- 5°C to 50°C
- Calibration Method:
- Scale selecting jumper and a 20-turn potentiometer for coarse adjustment and a multi-turn potentiometer for fine tuning
- Construction:
- RFI shielded high impact (UL94V-0) plastic case with LOX-IT self locking Lexan bezel over display
- Weight:
- 1 pound
Dimensions
