DIN2 Series
Great Features, Less Space...And A Super Low Price!
The new DIN2 digital indicators from RT Engineering, combine a host of features, yet consume very little enclosure space. All this at a low price.
The physical mounting dimensions of the DIN2 match the standard DIN panel dimensions, eliminating the need to recut and redrill existing panels.
Capable of accepting AC or DC input signals from 200mV to 600V and from 4-20 milliamps, one model can display Amps, Volts, RPM, FPM, or other engineering units.
Accuracy, Reliability, and Versatility backed by a two-year warranty.
Specifications
Voltage Model Specifications
- Input Signals:
- 200mV through 200 V or 4-20mA (DC only) inputs yielding display of .200 through 1999. Extended signal input ranges available. Pressure and flow transducers
- Maximum Signal Protection:
- 600V (voltage range); 30mA (current range)
- Input Impedance:
- voltage range: 1 megohm current range: 250 ohms
- Scaling Method:
- Coarse: jumper setting Fine: 20 turn pot
- Display:
- 3 1/2, bi polar, 0.56" high, 7 segment red LED's. Selectable decimal point location (1.8.8.8)
- Over-Range Indication:
- "1" in most significant position. Rest of display blank
- Reading Rate:
- 2.5 reading/sec., nominal
- Linear Accuracy:
- 0.1‰ of reading +/-1 digit typical
- Maximum Common Mode Voltage:
- 850VDC/850 VAC peak
- Common Mode Rejection:
- >-110 dB
- Normal Mode Rejection:
- >-60 dB
- Power:
- 115 VAC +/-10‰, 50/60 Hz 6 VA (230 VAC optional)
- Operating Temperature:
- 0-60°C
- Environmental Integrity:
- NEMA 4X
- Construction:
- bezel: high impact Lexan case: aluminum extruded
- Weight:
- 8 ounces
Dimensions
